BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//Crane Tech - ECPv6.18.2//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-ORIGINAL-URL:https://cranetech.ors.bz
X-WR-CALDESC:Events for Crane Tech
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:America/New_York
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20250309T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20251102T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20260308T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20261101T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20270314T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20271107T060000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;VALUE=DATE:20261102
DTEND;VALUE=DATE:20261105
DTSTAMP:20260512T225718Z
CREATED:20251102T190041Z
LAST-MODIFIED:20260512T225718Z
UID:10000086-1793577600-1793836799@cranetech.ors.bz
SUMMARY:Mobile Crane Operator - Qualification
DESCRIPTION:This course provides new and experienced operators with the knowledge and practical skills to safely operate mobile cranes in general industry environments. Instructor-led classroom and field training emphasize setup\, pre-use inspections\, signaling\, and managing swing radius for multiple crane configurations. The course follows OSHA 29 CFR 1910 and ASME B30.5 standards for mobile crane operation and is intended for operators who do not perform construction activities under OSHA 1926 Subpart CC. Participants receive qualification documentation confirming they meet OSHA and ASME requirements for safe mobile crane operation.
URL:https://cranetech.ors.bz/training-registration/mobile-crane-operator-qualification-11/
LOCATION:Crane Tech Campus\, Brandon\, FL\, 1215 Millennium Parkway\, Brandon\, FL\, 33511\, United States
CATEGORIES:All Crane,Training/Qualification
ATTACH;FMTTYPE=image/webp:https://cranetech.ors.bz/wp-content/uploads/2025/10/Mobile-Crane-Qualification-copia-1.webp
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20261102
DTEND;VALUE=DATE:20261105
DTSTAMP:20260512T225841Z
CREATED:20251102T200035Z
LAST-MODIFIED:20260512T225841Z
UID:10000105-1793577600-1793836799@cranetech.ors.bz
SUMMARY:Mobile Crane Operator Train-the-Trainer
DESCRIPTION:This Train-the-Trainer course qualifies internal personnel to deliver and document Mobile Crane Operator training using Crane Tech’s standardized curriculum and instructional framework. The program covers mobile crane operation in general industry environments\, with an added emphasis on conducting evaluations\, applying consistent qualification criteria\, and maintaining defensible training records aligned with OSHA 29 CFR 1910 and ASME B30.5 requirements. Participants leave credentialed to train and evaluate mobile crane operators using Crane Tech–provided materials\, supported by access to the TTT Portal\, standardized student kits\, and ongoing curriculum updates to support consistent\, audit-ready qualification practices.
URL:https://cranetech.ors.bz/training-registration/mobile-crane-operator-train-the-trainer-11/
LOCATION:Crane Tech Campus\, Brandon\, FL\, 1215 Millennium Parkway\, Brandon\, FL\, 33511\, United States
CATEGORIES:All Crane,Training/Qualification
ATTACH;FMTTYPE=image/webp:https://cranetech.ors.bz/wp-content/uploads/2025/10/Mobile-Crane-Qualification-copia-1.webp
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20261102
DTEND;VALUE=DATE:20261121
DTSTAMP:20260512T230009Z
CREATED:20251102T195539Z
LAST-MODIFIED:20260512T230009Z
UID:10000051-1793577600-1795219199@cranetech.ors.bz
SUMMARY:Mobile Crane Professional Operator Development
DESCRIPTION:Start a career in crane operations through Crane Tech’s Professional Operator Development (POD) program. This three-week course combines classroom instruction and guided hands-on training on real cranes to build strong foundational skills in setup\, lifting\, signaling\, and safety. The program meets OSHA and ASME requirements and prepares participants for multiple credentials. Students who successfully complete the program earn CCO TSS and TLL Mobile Crane Operator certification along with Rigger Level 1 qualification\, confirming their readiness for professional crane operation.
URL:https://cranetech.ors.bz/training-registration/mobile-crane-operator-development-3-weeks-10/
LOCATION:Crane Tech Campus\, Brandon\, FL\, 1215 Millennium Parkway\, Brandon\, FL\, 33511\, United States
CATEGORIES:All Crane,Training/Qualification
ATTACH;FMTTYPE=image/webp:https://cranetech.ors.bz/wp-content/uploads/2025/10/Mobile-Crane-Operator-Development-1.webp
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20261103
DTEND;VALUE=DATE:20261107
DTSTAMP:20260724T165634Z
CREATED:20251103T230202Z
LAST-MODIFIED:20260724T165634Z
UID:10000364-1793664000-1794009599@cranetech.ors.bz
SUMMARY:Signalperson CCO Certification
DESCRIPTION:Prepare for the CCO Signalperson written and practical exams with hands-on\, instructor-led training. Students practice hand and voice communication techniques\, crane movement coordination\, and load direction under realistic field conditions. The course aligns with OSHA 1926.1428 and ASME B30.5 standards. Exams are conducted during the course. Participants who pass both earn CCO Signalperson certification\, validating their ability to communicate safely and direct crane operations effectively. \n \nThis course is delivered in partnership with CERTEX USA\, a recognized provider of lifting and rigging solutions\, at their Wilmington\, CA facility. This collaboration allows Crane Tech to deliver its hands-on training approach in California using real equipment and a fully supported training environment.
URL:https://cranetech.ors.bz/training-registration/signalperson-cco-certification-3/
LOCATION:In partnership with CERTEX\, Wilmington\, CA\, 1707 E Anaheim St\, Wilmington\, CA\, 90744\, United States
CATEGORIES:CCO Certification
ATTACH;FMTTYPE=image/webp:https://cranetech.ors.bz/wp-content/uploads/2025/10/Signalperson-Training-Center-Coaching-POD-11-2016-hand-signal.webp
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20261104
DTEND;VALUE=DATE:20261107
DTSTAMP:20260528T145029Z
CREATED:20251104T155008Z
LAST-MODIFIED:20260528T145029Z
UID:10000370-1793750400-1794009599@cranetech.ors.bz
SUMMARY:Rigger Level I CCO Certification
DESCRIPTION:Rigger Level I – CCO Certification Prep\nDevelop a solid foundation in rigging principles while preparing for the CCO Rigger Level I written and practical exams. Students learn to select rigging gear\, calculate load weights\, inspect hardware\, and apply safe hitches through hands-on exercises. The course meets OSHA and ASME B30.9/B30.26 standards. Participants who pass both exams earn CCO Rigger Level I certification\, verifying their ability to perform basic rigging safely and competently. \n \nThis course is delivered in partnership with CERTEX USA\, a recognized provider of lifting and rigging solutions\, at their Wilmington\, CA facility. This collaboration allows Crane Tech to deliver its hands-on training approach in California using real equipment and a fully supported training environment.
URL:https://cranetech.ors.bz/training-registration/rigger-level-i-cco-certification-3/
LOCATION:In partnership with CERTEX\, Wilmington\, CA\, 1707 E Anaheim St\, Wilmington\, CA\, 90744\, United States
CATEGORIES:CCO Certification
ATTACH;FMTTYPE=image/webp:https://cranetech.ors.bz/wp-content/uploads/2025/10/worker_helmet_heavy-duty-chainhook-2-1.webp
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20261106
DTEND;VALUE=DATE:20261107
DTSTAMP:20260512T230221Z
CREATED:20251102T200048Z
LAST-MODIFIED:20260512T230221Z
UID:10000178-1793923200-1794009599@cranetech.ors.bz
SUMMARY:Rigger Level 1 Train-the-Trainer
DESCRIPTION:This Train-the-Trainer course qualifies internal personnel to deliver and document Qualified Rigger Level 1 training using Crane Tech’s standardized curriculum and instructional framework. The program covers foundational rigging principles for routine lifting operations\, including standard hitches\, sling and hardware inspection\, load weight estimation\, and hazard recognition\, with additional emphasis on conducting evaluations\, applying consistent qualification criteria\, and maintaining defensible training records aligned with OSHA 1926.251 and ASME B30.9/B30.26. Participants complete written and practical evaluations and leave credentialed to train and evaluate Level 1 riggers using Crane Tech–provided materials\, supported by standardized student kits\, the TTT Portal\, and ongoing curriculum updates to support audit-ready qualification practices.
URL:https://cranetech.ors.bz/training-registration/rigger-level-1-train-the-trainer-20/
LOCATION:Crane Tech Campus\, Brandon\, FL\, 1215 Millennium Parkway\, Brandon\, FL\, 33511\, United States
CATEGORIES:Rigging & Signaling,Training/Qualification
ATTACH;FMTTYPE=image/webp:https://cranetech.ors.bz/wp-content/uploads/2025/10/worker_helmet_heavy-duty-chainhook-2-1.webp
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20261106
DTEND;VALUE=DATE:20261107
DTSTAMP:20260513T143755Z
CREATED:20251106T190050Z
LAST-MODIFIED:20260513T143755Z
UID:10000146-1793923200-1794009599@cranetech.ors.bz
SUMMARY:Rigger Level 1
DESCRIPTION:Gain the skills to safely perform basic rigging under supervision. This hands-on course covers standard hitches\, sling and hardware inspection\, load weight estimation\, and safe control of routine lifts. Students learn to recognize hazards\, select the right rigging gear\, and apply safe lifting practices in compliance with OSHA 1926.251 and ASME B30.9/B30.26. Participants earn qualification documentation confirming they can perform standard rigging operations safely and competently.
URL:https://cranetech.ors.bz/training-registration/rigger-level-1-20/
LOCATION:Crane Tech Campus\, Brandon\, FL\, 1215 Millennium Parkway\, Brandon\, FL\, 33511\, United States
CATEGORIES:Rigging & Signaling,Training/Qualification
ATTACH;FMTTYPE=image/webp:https://cranetech.ors.bz/wp-content/uploads/2025/10/worker_helmet_heavy-duty-chainhook-2-1.webp
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20261109
DTEND;VALUE=DATE:20261110
DTSTAMP:20260513T143901Z
CREATED:20251106T200041Z
LAST-MODIFIED:20260513T143901Z
UID:10000132-1794182400-1794268799@cranetech.ors.bz
SUMMARY:Signalperson Train-the-Trainer
DESCRIPTION:This Train-the-Trainer course qualifies internal personnel to deliver and document Qualified Signalperson training using Crane Tech’s standardized curriculum and instructional framework. The program covers standardized hand and voice signals\, radio communication protocols\, and situational awareness required to safely direct crane operations\, with additional emphasis on conducting evaluations\, applying consistent qualification criteria\, and maintaining defensible training records aligned with OSHA 1926.1428 and ASME B30.5 standards. Participants complete written and practical evaluations and leave credentialed to train and evaluate signalpersons using Crane Tech–provided materials\, supported by standardized student kits\, the TTT Portal\, and ongoing curriculum updates to support audit-ready qualification practices.
URL:https://cranetech.ors.bz/training-registration/signalperson-train-the-trainer-9/
LOCATION:Crane Tech Campus\, Brandon\, FL\, 1215 Millennium Parkway\, Brandon\, FL\, 33511\, United States
CATEGORIES:Rigging & Signaling,Training/Qualification
ATTACH;FMTTYPE=image/webp:https://cranetech.ors.bz/wp-content/uploads/2025/10/Signalperson-Training-Center-Coaching-POD-11-2016-hand-signal.webp
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20261109
DTEND;VALUE=DATE:20261110
DTSTAMP:20260513T144105Z
CREATED:20251109T190016Z
LAST-MODIFIED:20260513T144105Z
UID:10000111-1794182400-1794268799@cranetech.ors.bz
SUMMARY:Signalperson
DESCRIPTION:Learn the standardized hand and voice signals used to direct cranes safely and effectively. This course combines classroom instruction with practical demonstrations to build clear\, confident communication between operators and rigging crews. Students practice signaling techniques\, radio protocol\, and situational awareness under real-world conditions. Training aligns with OSHA 1926.1428 and ASME B30.5 standards. Successful participants receive qualification documentation verifying their ability to communicate safely and direct crane movements on the jobsite.
URL:https://cranetech.ors.bz/training-registration/signalperson-10/
LOCATION:Crane Tech Campus\, Brandon\, FL\, 1215 Millennium Parkway\, Brandon\, FL\, 33511\, United States
CATEGORIES:Rigging & Signaling,Training/Qualification
ATTACH;FMTTYPE=image/webp:https://cranetech.ors.bz/wp-content/uploads/2025/10/Signalperson-Training-Center-Coaching-POD-11-2016-hand-signal.webp
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20261109
DTEND;VALUE=DATE:20261114
DTSTAMP:20260527T221631Z
CREATED:20251109T231032Z
LAST-MODIFIED:20260527T221631Z
UID:10000365-1794182400-1794614399@cranetech.ors.bz
SUMMARY:Signalperson CCO Certification
DESCRIPTION:Prepare for the CCO Signalperson written and practical exams with hands-on\, instructor-led training. Students practice hand and voice communication techniques\, crane movement coordination\, and load direction under realistic field conditions. The course aligns with OSHA 1926.1428 and ASME B30.5 standards. Exams are conducted during the course. Participants who pass both earn CCO Signalperson certification\, validating their ability to communicate safely and direct crane operations effectively. \n \nThis course is delivered in partnership with CERTEX USA\, a recognized provider of lifting and rigging solutions\, at their Wilmington\, CA facility. This collaboration allows Crane Tech to deliver its hands-on training approach in California using real equipment and a fully supported training environment.
URL:https://cranetech.ors.bz/training-registration/signalperson-cco-certification-4/
LOCATION:In partnership with CERTEX\, Wilmington\, CA\, 1707 E Anaheim St\, Wilmington\, CA\, 90744\, United States
CATEGORIES:CCO Certification
ATTACH;FMTTYPE=image/webp:https://cranetech.ors.bz/wp-content/uploads/2025/10/Signalperson-Training-Center-Coaching-POD-11-2016-hand-signal.webp
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20261110
DTEND;VALUE=DATE:20261111
DTSTAMP:20260513T144220Z
CREATED:20251109T200011Z
LAST-MODIFIED:20260513T144220Z
UID:10000180-1794268800-1794355199@cranetech.ors.bz
SUMMARY:Rigger Level 1 Train-the-Trainer
DESCRIPTION:This Train-the-Trainer course qualifies internal personnel to deliver and document Qualified Rigger Level 1 training using Crane Tech’s standardized curriculum and instructional framework. The program covers foundational rigging principles for routine lifting operations\, including standard hitches\, sling and hardware inspection\, load weight estimation\, and hazard recognition\, with additional emphasis on conducting evaluations\, applying consistent qualification criteria\, and maintaining defensible training records aligned with OSHA 1926.251 and ASME B30.9/B30.26. Participants complete written and practical evaluations and leave credentialed to train and evaluate Level 1 riggers using Crane Tech–provided materials\, supported by standardized student kits\, the TTT Portal\, and ongoing curriculum updates to support audit-ready qualification practices.
URL:https://cranetech.ors.bz/training-registration/rigger-level-1-train-the-trainer-21/
LOCATION:Crane Tech Campus\, Brandon\, FL\, 1215 Millennium Parkway\, Brandon\, FL\, 33511\, United States
CATEGORIES:Rigging & Signaling,Training/Qualification
ATTACH;FMTTYPE=image/webp:https://cranetech.ors.bz/wp-content/uploads/2025/10/worker_helmet_heavy-duty-chainhook-2-1.webp
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20261110
DTEND;VALUE=DATE:20261111
DTSTAMP:20260513T144325Z
CREATED:20251110T190038Z
LAST-MODIFIED:20260513T144325Z
UID:10000147-1794268800-1794355199@cranetech.ors.bz
SUMMARY:Rigger Level 1
DESCRIPTION:Gain the skills to safely perform basic rigging under supervision. This hands-on course covers standard hitches\, sling and hardware inspection\, load weight estimation\, and safe control of routine lifts. Students learn to recognize hazards\, select the right rigging gear\, and apply safe lifting practices in compliance with OSHA 1926.251 and ASME B30.9/B30.26. Participants earn qualification documentation confirming they can perform standard rigging operations safely and competently.
URL:https://cranetech.ors.bz/training-registration/rigger-level-1-21/
LOCATION:Crane Tech Campus\, Brandon\, FL\, 1215 Millennium Parkway\, Brandon\, FL\, 33511\, United States
CATEGORIES:Rigging & Signaling,Training/Qualification
ATTACH;FMTTYPE=image/webp:https://cranetech.ors.bz/wp-content/uploads/2025/10/worker_helmet_heavy-duty-chainhook-2-1.webp
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20261110
DTEND;VALUE=DATE:20261114
DTSTAMP:20260528T145233Z
CREATED:20251110T155057Z
LAST-MODIFIED:20260528T145233Z
UID:10000371-1794268800-1794614399@cranetech.ors.bz
SUMMARY:Rigger Level I CCO Certification
DESCRIPTION:Rigger Level I – CCO Certification Prep\nDevelop a solid foundation in rigging principles while preparing for the CCO Rigger Level I written and practical exams. Students learn to select rigging gear\, calculate load weights\, inspect hardware\, and apply safe hitches through hands-on exercises. The course meets OSHA and ASME B30.9/B30.26 standards. Participants who pass both exams earn CCO Rigger Level I certification\, verifying their ability to perform basic rigging safely and competently. \n \nThis course is delivered in partnership with CERTEX USA\, a recognized provider of lifting and rigging solutions\, at their Wilmington\, CA facility. This collaboration allows Crane Tech to deliver its hands-on training approach in California using real equipment and a fully supported training environment.
URL:https://cranetech.ors.bz/training-registration/rigger-level-i-cco-certification-4/
LOCATION:In partnership with CERTEX\, Wilmington\, CA\, 1707 E Anaheim St\, Wilmington\, CA\, 90744\, United States
CATEGORIES:CCO Certification
ATTACH;FMTTYPE=image/webp:https://cranetech.ors.bz/wp-content/uploads/2025/10/worker_helmet_heavy-duty-chainhook-2-1.webp
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20261111
DTEND;VALUE=DATE:20261113
DTSTAMP:20260513T144538Z
CREATED:20251110T200005Z
LAST-MODIFIED:20260513T144538Z
UID:10000060-1794355200-1794527999@cranetech.ors.bz
SUMMARY:Rigger Level 2 Train-the-Trainer
DESCRIPTION:This Train-the-Trainer course qualifies internal personnel to deliver and document Qualified Rigger Level 2 training using Crane Tech’s standardized curriculum and instructional framework. The program covers advanced rigging concepts for non-routine lifting operations\, including load center-of-gravity estimation\, sling tension calculations\, non-standard hitches\, and rigging in restricted or uneven conditions\, with additional emphasis on conducting evaluations\, applying consistent qualification criteria\, and maintaining defensible training records aligned with OSHA 1926.251 and applicable ASME B30 standards. Participants complete written and practical evaluations and leave credentialed to train and evaluate Level 2 riggers using Crane Tech–provided materials\, supported by standardized student kits\, the TTT Portal\, and ongoing curriculum updates to support audit-ready qualification practices.
URL:https://cranetech.ors.bz/training-registration/rigger-level-2-train-the-trainer-10/
LOCATION:Crane Tech Campus\, Brandon\, FL\, 1215 Millennium Parkway\, Brandon\, FL\, 33511\, United States
CATEGORIES:Rigging & Signaling,Training/Qualification
ATTACH;FMTTYPE=image/webp:https://cranetech.ors.bz/wp-content/uploads/2025/10/Rigging-Signaling-rigger2-v2.webp
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20261111
DTEND;VALUE=DATE:20261113
DTSTAMP:20260513T144725Z
CREATED:20251111T190032Z
LAST-MODIFIED:20260513T144725Z
UID:10000202-1794355200-1794527999@cranetech.ors.bz
SUMMARY:Rigger Level 2
DESCRIPTION:Advance your rigging expertise to handle more complex lifts and variable conditions. This course builds on Level 1 by introducing load center-of-gravity estimation\, sling tension calculations\, non-standard hitches\, and rigging in restricted or uneven areas. Instructor-led field exercises reinforce safe lift planning and coordination with crane operators. Training follows OSHA 1926.251 and ASME B30 standards for qualified riggers. Graduates receive qualification documentation verifying their competency to perform and plan non-routine rigging operations.
URL:https://cranetech.ors.bz/training-registration/rigger-level-2-9/
LOCATION:Crane Tech Campus\, Brandon\, FL\, 1215 Millennium Parkway\, Brandon\, FL\, 33511\, United States
CATEGORIES:Rigging & Signaling,Training/Qualification
ATTACH;FMTTYPE=image/webp:https://cranetech.ors.bz/wp-content/uploads/2025/10/Rigging-Signaling-rigger2-v2.webp
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20261111
DTEND;VALUE=DATE:20261114
DTSTAMP:20260528T152928Z
CREATED:20251111T162832Z
LAST-MODIFIED:20260528T152928Z
UID:10000375-1794355200-1794614399@cranetech.ors.bz
SUMMARY:Rigger Level II CCO Certification
DESCRIPTION:Advance your rigging knowledge to handle complex lifts and earn your CCO Rigger Level II certification. This course builds on Level I concepts and introduces advanced rigging calculations\, multi-crane coordination\, and non-routine lift planning. Instructor-led demonstrations and field exercises prepare students for the written and practical exams\, administered during the course. Graduates earn nationally accredited CCO certification\, confirming their advanced rigging skills and technical proficiency. \nCCO requires candidates seeking Rigger Level II certification to also obtain Rigger Level I certification. \n \nThis course is delivered in partnership with CERTEX USA\, a recognized provider of lifting and rigging solutions\, at their Wilmington\, CA facility. This collaboration allows Crane Tech to deliver its hands-on training approach in California using real equipment and a fully supported training environment.
URL:https://cranetech.ors.bz/training-registration/rigger-level-ii-cco-certification-3/
LOCATION:In partnership with CERTEX\, Wilmington\, CA\, 1707 E Anaheim St\, Wilmington\, CA\, 90744\, United States
CATEGORIES:CCO Certification
ATTACH;FMTTYPE=image/webp:https://cranetech.ors.bz/wp-content/uploads/2025/10/worker_helmet_heavy-duty-chainhook-2-1.webp
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20261116
DTEND;VALUE=DATE:20261121
DTSTAMP:20260513T145703Z
CREATED:20251116T175121Z
LAST-MODIFIED:20260513T145703Z
UID:10000192-1794787200-1795219199@cranetech.ors.bz
SUMMARY:Mobile Crane Operator CCO Certification
DESCRIPTION:Train to earn your CCO Mobile Crane Operator certification with Crane Tech’s instructor-led\, hands-on course. Students learn to read and apply load charts\, conduct safe setup and pre-use inspections\, and execute precise lifting operations using Telescopic Boom Swing Cab (TSS) and Telescopic Boom Fixed Cab (TLL) cranes. Written and practical CCO exams are administered during the course. Graduates earn nationally accredited CCO certification\, meeting OSHA 1926 Subpart CC and ASME B30.5 requirements for crane operators. \nTuition includes training\, written and practical exams\, and administrative processing for one CCO designation. Candidates pursuing both TSS and TLL certifications may select the two-designation registration option.
URL:https://cranetech.ors.bz/training-registration/mobile-crane-operator-cco-certification-with-exams-11/
LOCATION:Crane Tech Campus\, Brandon\, FL\, 1215 Millennium Parkway\, Brandon\, FL\, 33511\, United States
CATEGORIES:CCO Certification
ATTACH;FMTTYPE=image/webp:https://cranetech.ors.bz/wp-content/uploads/2025/11/Mobile-Crane-1-1.webp
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20261116
DTEND;VALUE=DATE:20261121
DTSTAMP:20260527T221547Z
CREATED:20251116T231144Z
LAST-MODIFIED:20260527T221547Z
UID:10000366-1794787200-1795219199@cranetech.ors.bz
SUMMARY:Signalperson CCO Certification
DESCRIPTION:Prepare for the CCO Signalperson written and practical exams with hands-on\, instructor-led training. Students practice hand and voice communication techniques\, crane movement coordination\, and load direction under realistic field conditions. The course aligns with OSHA 1926.1428 and ASME B30.5 standards. Exams are conducted during the course. Participants who pass both earn CCO Signalperson certification\, validating their ability to communicate safely and direct crane operations effectively. \n \nThis course is delivered in partnership with CERTEX USA\, a recognized provider of lifting and rigging solutions\, at their Wilmington\, CA facility. This collaboration allows Crane Tech to deliver its hands-on training approach in California using real equipment and a fully supported training environment.
URL:https://cranetech.ors.bz/training-registration/signalperson-cco-certification-5/
LOCATION:In partnership with CERTEX\, Wilmington\, CA\, 1707 E Anaheim St\, Wilmington\, CA\, 90744\, United States
CATEGORIES:CCO Certification
ATTACH;FMTTYPE=image/webp:https://cranetech.ors.bz/wp-content/uploads/2025/10/Signalperson-Training-Center-Coaching-POD-11-2016-hand-signal.webp
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20261117
DTEND;VALUE=DATE:20261121
DTSTAMP:20260722T171715Z
CREATED:20251117T155304Z
LAST-MODIFIED:20260722T171715Z
UID:10000372-1794873600-1795219199@cranetech.ors.bz
SUMMARY:Rigger Level I CCO Certification
DESCRIPTION:Rigger Level I – CCO Certification Prep\nDevelop a solid foundation in rigging principles while preparing for the CCO Rigger Level I written and practical exams. Students learn to select rigging gear\, calculate load weights\, inspect hardware\, and apply safe hitches through hands-on exercises. The course meets OSHA and ASME B30.9/B30.26 standards. Participants who pass both exams earn CCO Rigger Level I certification\, verifying their ability to perform basic rigging safely and competently. \n \nThis course is delivered in partnership with CERTEX USA\, a recognized provider of lifting and rigging solutions\, at their Wilmington\, CA facility. This collaboration allows Crane Tech to deliver its hands-on training approach in California using real equipment and a fully supported training environment.
URL:https://cranetech.ors.bz/training-registration/rigger-level-i-cco-certification-5/
LOCATION:In partnership with CERTEX\, Wilmington\, CA\, 1707 E Anaheim St\, Wilmington\, CA\, 90744\, United States
CATEGORIES:CCO Certification
ATTACH;FMTTYPE=image/webp:https://cranetech.ors.bz/wp-content/uploads/2025/10/worker_helmet_heavy-duty-chainhook-2-1.webp
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20261118
DTEND;VALUE=DATE:20261121
DTSTAMP:20260722T171756Z
CREATED:20251118T162942Z
LAST-MODIFIED:20260722T171756Z
UID:10000376-1794960000-1795219199@cranetech.ors.bz
SUMMARY:Rigger Level II CCO Certification
DESCRIPTION:Advance your rigging knowledge to handle complex lifts and earn your CCO Rigger Level II certification. This course builds on Level I concepts and introduces advanced rigging calculations\, multi-crane coordination\, and non-routine lift planning. Instructor-led demonstrations and field exercises prepare students for the written and practical exams\, administered during the course. Graduates earn nationally accredited CCO certification\, confirming their advanced rigging skills and technical proficiency. \nCCO requires candidates seeking Rigger Level II certification to also obtain Rigger Level I certification. \n \nThis course is delivered in partnership with CERTEX USA\, a recognized provider of lifting and rigging solutions\, at their Wilmington\, CA facility. This collaboration allows Crane Tech to deliver its hands-on training approach in California using real equipment and a fully supported training environment.
URL:https://cranetech.ors.bz/training-registration/rigger-level-ii-cco-certification-4/
LOCATION:In partnership with CERTEX\, Wilmington\, CA\, 1707 E Anaheim St\, Wilmington\, CA\, 90744\, United States
CATEGORIES:CCO Certification
ATTACH;FMTTYPE=image/webp:https://cranetech.ors.bz/wp-content/uploads/2025/10/worker_helmet_heavy-duty-chainhook-2-1.webp
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20261130
DTEND;VALUE=DATE:20261201
DTSTAMP:20260513T145918Z
CREATED:20251116T190051Z
LAST-MODIFIED:20260513T145918Z
UID:10000226-1795996800-1796083199@cranetech.ors.bz
SUMMARY:Overhead & Gantry Crane Operator
DESCRIPTION:Learn to operate overhead and gantry cranes with precision and confidence in manufacturing\, maintenance\, and industrial facilities. This instructor-led course covers pre-use inspections\, load alignment\, pendant and cab control operation\, and coordination with rigging teams for safe\, efficient lifts. The program meets OSHA 29 CFR 1910.179 and ASME B30.2 standards. Participants complete written and practical evaluations and receive qualification documentation verifying they meet OSHA and ASME standards for overhead and gantry crane operation.
URL:https://cranetech.ors.bz/training-registration/overhead-gantry-crane-operator-6/
LOCATION:Crane Tech Campus\, Brandon\, FL\, 1215 Millennium Parkway\, Brandon\, FL\, 33511\, United States
CATEGORIES:All Crane,Training/Qualification
ATTACH;FMTTYPE=image/webp:https://cranetech.ors.bz/wp-content/uploads/2025/12/All-Cranes_Overhead-_Gantry-Crane_Training-Center-Overhead-Inspection-Aerial-Hands-on-Overhead-Crane_CCO.webp
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20261130
DTEND;VALUE=DATE:20261201
DTSTAMP:20260513T150257Z
CREATED:20251130T200010Z
LAST-MODIFIED:20260513T150257Z
UID:10000259-1795996800-1796083199@cranetech.ors.bz
SUMMARY:Overhead & Gantry Crane Operator Train-the-Trainer
DESCRIPTION:This Train-the-Trainer course qualifies internal personnel to deliver and document Overhead and Gantry Crane Operator training using Crane Tech’s standardized curriculum and instructional framework. The program covers overhead and gantry crane operation in manufacturing\, maintenance\, and industrial environments\, with additional emphasis on conducting evaluations\, applying consistent qualification criteria\, and maintaining defensible training records aligned with OSHA 29 CFR 1910.179 and ASME B30.2 standards. Participants complete written and practical evaluations and leave credentialed to train and evaluate operators using Crane Tech–provided materials\, supported by access to standardized student kits\, the TTT Portal\, and ongoing curriculum updates to support audit-ready qualification practices.
URL:https://cranetech.ors.bz/training-registration/overhead-gantry-crane-operator-train-the-trainer-6/
LOCATION:Crane Tech Campus\, Brandon\, FL\, 1215 Millennium Parkway\, Brandon\, FL\, 33511\, United States
CATEGORIES:All Crane,Training/Qualification
ATTACH;FMTTYPE=image/webp:https://cranetech.ors.bz/wp-content/uploads/2025/12/All-Cranes_Overhead-_Gantry-Crane_Training-Center-Overhead-Inspection-Aerial-Hands-on-Overhead-Crane_CCO.webp
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20261130
DTEND;VALUE=DATE:20261203
DTSTAMP:20260513T150534Z
CREATED:20251130T190031Z
LAST-MODIFIED:20260513T150534Z
UID:10000087-1795996800-1796255999@cranetech.ors.bz
SUMMARY:Mobile Crane Operator - Qualification
DESCRIPTION:This course provides new and experienced operators with the knowledge and practical skills to safely operate mobile cranes in general industry environments. Instructor-led classroom and field training emphasize setup\, pre-use inspections\, signaling\, and managing swing radius for multiple crane configurations. The course follows OSHA 29 CFR 1910 and ASME B30.5 standards for mobile crane operation and is intended for operators who do not perform construction activities under OSHA 1926 Subpart CC. Participants receive qualification documentation confirming they meet OSHA and ASME requirements for safe mobile crane operation.
URL:https://cranetech.ors.bz/training-registration/mobile-crane-operator-qualification-12/
LOCATION:Crane Tech Campus\, Brandon\, FL\, 1215 Millennium Parkway\, Brandon\, FL\, 33511\, United States
CATEGORIES:All Crane,Training/Qualification
ATTACH;FMTTYPE=image/webp:https://cranetech.ors.bz/wp-content/uploads/2025/10/Mobile-Crane-Qualification-copia-1.webp
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20261130
DTEND;VALUE=DATE:20261203
DTSTAMP:20260513T150718Z
CREATED:20251130T200027Z
LAST-MODIFIED:20260513T150718Z
UID:10000106-1795996800-1796255999@cranetech.ors.bz
SUMMARY:Mobile Crane Operator Train-the-Trainer
DESCRIPTION:This Train-the-Trainer course qualifies internal personnel to deliver and document Mobile Crane Operator training using Crane Tech’s standardized curriculum and instructional framework. The program covers mobile crane operation in general industry environments\, with an added emphasis on conducting evaluations\, applying consistent qualification criteria\, and maintaining defensible training records aligned with OSHA 29 CFR 1910 and ASME B30.5 requirements. Participants leave credentialed to train and evaluate mobile crane operators using Crane Tech–provided materials\, supported by access to the TTT Portal\, standardized student kits\, and ongoing curriculum updates to support consistent\, audit-ready qualification practices.
URL:https://cranetech.ors.bz/training-registration/mobile-crane-operator-train-the-trainer-12/
LOCATION:Crane Tech Campus\, Brandon\, FL\, 1215 Millennium Parkway\, Brandon\, FL\, 33511\, United States
CATEGORIES:All Crane,Training/Qualification
ATTACH;FMTTYPE=image/webp:https://cranetech.ors.bz/wp-content/uploads/2025/10/Mobile-Crane-Qualification-copia-1.webp
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20261130
DTEND;VALUE=DATE:20261205
DTSTAMP:20260526T165727Z
CREATED:20251130T174801Z
LAST-MODIFIED:20260526T165727Z
UID:10000354-1795996800-1796428799@cranetech.ors.bz
SUMMARY:Mobile Crane Operator CCO Certification
DESCRIPTION:Train to earn your CCO Mobile Crane Operator certification with Crane Tech’s instructor-led\, hands-on course. Students learn to read and apply load charts\, conduct safe setup and pre-use inspections\, and execute precise lifting operations using Telescopic Boom Swing Cab (TSS) and Telescopic Boom Fixed Cab (TLL) cranes. Written and practical CCO exams are administered during the course. Graduates earn nationally accredited CCO certification\, meeting OSHA 1926 Subpart CC and ASME B30.5 requirements for crane operators. \nCandidates may register for either one CCO designation (TSS or TLL) or both TSS and TLL designations based on their certification needs. Both registration options include training\, written and practical exams\, and administrative processing. \n \nThis course is delivered in partnership with CERTEX USA\, a recognized provider of lifting and rigging solutions\, at their Wilmington\, CA facility. This collaboration allows Crane Tech to deliver its hands-on training approach in California using real equipment and a fully supported training environment.
URL:https://cranetech.ors.bz/training-registration/mobile-crane-operator-cco-certification/
LOCATION:In partnership with CERTEX\, Wilmington\, CA\, 1707 E Anaheim St\, Wilmington\, CA\, 90744\, United States
CATEGORIES:CCO Certification
ATTACH;FMTTYPE=image/webp:https://cranetech.ors.bz/wp-content/uploads/2025/11/Mobile-Crane-1-1.webp
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20261130
DTEND;VALUE=DATE:20261219
DTSTAMP:20260513T150825Z
CREATED:20251130T195836Z
LAST-MODIFIED:20260513T150825Z
UID:10000052-1795996800-1797638399@cranetech.ors.bz
SUMMARY:Mobile Crane Professional Operator Development
DESCRIPTION:Start a career in crane operations through Crane Tech’s Professional Operator Development (POD) program. This three-week course combines classroom instruction and guided hands-on training on real cranes to build strong foundational skills in setup\, lifting\, signaling\, and safety. The program meets OSHA and ASME requirements and prepares participants for multiple credentials. Students who successfully complete the program earn CCO TSS and TLL Mobile Crane Operator certification along with Rigger Level 1 qualification\, confirming their readiness for professional crane operation.
URL:https://cranetech.ors.bz/training-registration/mobile-crane-operator-development-3-weeks-11/
LOCATION:Crane Tech Campus\, Brandon\, FL\, 1215 Millennium Parkway\, Brandon\, FL\, 33511\, United States
CATEGORIES:All Crane,Training/Qualification
ATTACH;FMTTYPE=image/webp:https://cranetech.ors.bz/wp-content/uploads/2025/10/Mobile-Crane-Operator-Development-1.webp
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20261202
DTEND;VALUE=DATE:20261204
DTSTAMP:20260513T151117Z
CREATED:20251202T192540Z
LAST-MODIFIED:20260513T151117Z
UID:10000233-1796169600-1796342399@cranetech.ors.bz
SUMMARY:Overhead Crane Inspector
DESCRIPTION:Train to perform frequent and annual inspections of overhead cranes and hoists used in manufacturing\, maintenance\, and industrial settings. This hands-on course follows OSHA 1910.179\, ASME B30.16\, and ASME B30.17 standards\, teaching participants to evaluate mechanical\, structural\, and electrical components for safety and compliance. Students practice applying inspection criteria and documenting results accurately. Graduates earn qualification documentation confirming their ability to inspect and maintain OSHA- and ASME-compliant overhead lifting systems.
URL:https://cranetech.ors.bz/training-registration/overhead-crane-inspector-6/
LOCATION:Crane Tech Campus\, Brandon\, FL\, 1215 Millennium Parkway\, Brandon\, FL\, 33511\, United States
CATEGORIES:Inspector,Training/Qualification
ATTACH;FMTTYPE=image/webp:https://cranetech.ors.bz/wp-content/uploads/2025/10/Inspector_Overhead-Crane-Inspector_Training-Center-Overhead-Inspection-Aerial-Hands-on-Overhead-Crane-2-1.webp
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20261204
DTEND;VALUE=DATE:20261205
DTSTAMP:20260513T151214Z
CREATED:20251202T200039Z
LAST-MODIFIED:20260513T151214Z
UID:10000181-1796342400-1796428799@cranetech.ors.bz
SUMMARY:Rigger Level 1 Train-the-Trainer
DESCRIPTION:This Train-the-Trainer course qualifies internal personnel to deliver and document Qualified Rigger Level 1 training using Crane Tech’s standardized curriculum and instructional framework. The program covers foundational rigging principles for routine lifting operations\, including standard hitches\, sling and hardware inspection\, load weight estimation\, and hazard recognition\, with additional emphasis on conducting evaluations\, applying consistent qualification criteria\, and maintaining defensible training records aligned with OSHA 1926.251 and ASME B30.9/B30.26. Participants complete written and practical evaluations and leave credentialed to train and evaluate Level 1 riggers using Crane Tech–provided materials\, supported by standardized student kits\, the TTT Portal\, and ongoing curriculum updates to support audit-ready qualification practices.
URL:https://cranetech.ors.bz/training-registration/rigger-level-1-train-the-trainer-22/
LOCATION:Crane Tech Campus\, Brandon\, FL\, 1215 Millennium Parkway\, Brandon\, FL\, 33511\, United States
CATEGORIES:Rigging & Signaling,Training/Qualification
ATTACH;FMTTYPE=image/webp:https://cranetech.ors.bz/wp-content/uploads/2025/10/worker_helmet_heavy-duty-chainhook-2-1.webp
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20261204
DTEND;VALUE=DATE:20261205
DTSTAMP:20260513T151312Z
CREATED:20251204T190046Z
LAST-MODIFIED:20260513T151312Z
UID:10000148-1796342400-1796428799@cranetech.ors.bz
SUMMARY:Rigger Level 1
DESCRIPTION:Gain the skills to safely perform basic rigging under supervision. This hands-on course covers standard hitches\, sling and hardware inspection\, load weight estimation\, and safe control of routine lifts. Students learn to recognize hazards\, select the right rigging gear\, and apply safe lifting practices in compliance with OSHA 1926.251 and ASME B30.9/B30.26. Participants earn qualification documentation confirming they can perform standard rigging operations safely and competently.
URL:https://cranetech.ors.bz/training-registration/rigger-level-1-22/
LOCATION:Crane Tech Campus\, Brandon\, FL\, 1215 Millennium Parkway\, Brandon\, FL\, 33511\, United States
CATEGORIES:Rigging & Signaling,Training/Qualification
ATTACH;FMTTYPE=image/webp:https://cranetech.ors.bz/wp-content/uploads/2025/10/worker_helmet_heavy-duty-chainhook-2-1.webp
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20261207
DTEND;VALUE=DATE:20261208
DTSTAMP:20260513T151415Z
CREATED:20251204T200004Z
LAST-MODIFIED:20260513T151415Z
UID:10000133-1796601600-1796687999@cranetech.ors.bz
SUMMARY:Signalperson Train-the-Trainer
DESCRIPTION:This Train-the-Trainer course qualifies internal personnel to deliver and document Qualified Signalperson training using Crane Tech’s standardized curriculum and instructional framework. The program covers standardized hand and voice signals\, radio communication protocols\, and situational awareness required to safely direct crane operations\, with additional emphasis on conducting evaluations\, applying consistent qualification criteria\, and maintaining defensible training records aligned with OSHA 1926.1428 and ASME B30.5 standards. Participants complete written and practical evaluations and leave credentialed to train and evaluate signalpersons using Crane Tech–provided materials\, supported by standardized student kits\, the TTT Portal\, and ongoing curriculum updates to support audit-ready qualification practices.
URL:https://cranetech.ors.bz/training-registration/signalperson-train-the-trainer-10/
LOCATION:Morgan City\, LA\, Morgan City\, LA\, United States
CATEGORIES:Rigging & Signaling,Training/Qualification
ATTACH;FMTTYPE=image/webp:https://cranetech.ors.bz/wp-content/uploads/2025/10/Signalperson-Training-Center-Coaching-POD-11-2016-hand-signal.webp
END:VEVENT
END:VCALENDAR